Geliştiriciler için API Referansı

Başlarken

kimlik doğrulama

Oran Sınırı

Yanıt İşleme

Geliştiriciler için API Referansı v3

Başlarken

İsteklerin sistem tarafından işlenmesi için bir API anahtarı gereklidir. Bir kullanıcı kaydolduğunda, bu kullanıcı için otomatik olarak bir API anahtarı oluşturulur. API anahtarı, her istekle birlikte gönderilmelidir (aşağıdaki tam örneğe bakın). API anahtarı gönderilmezse veya süresi dolmuşsa bir hata olacaktır. Kötüye kullanımı önlemek için lütfen API anahtarınızı gizli tuttuğunuzdan emin olun.

kimlik doğrulama

API sistemiyle kimlik doğrulaması yapmak için API anahtarınızı her istekle birlikte bir yetkilendirme belirteci olarak göndermeniz gerekir. Aşağıda örnek kodu görebilirsiniz.

cURL PHP

curl --location --request POST 'https://link.milenyums.com/api/url/add' \ 
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);

Oran Sınırı

API'miz, kararlılığını en üst düzeye çıkarmak için isteklerdeki ani artışlara karşı koruma sağlayan bir hız sınırlayıcıya sahiptir. Hız sınırlayıcımız şu anda 1 dakika başına 30 istekle sınırlandırılmıştır.

Yanıtın yanında birkaç başlık gönderilir ve bunlar istekle ilgili çeşitli bilgileri belirlemek için incelenebilir.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP

Yanıt İşleme

Tüm API yanıtı, varsayılan olarak JSON biçiminde döndürülür. Bunu kullanılabilir verilere dönüştürmek için dile göre uygun işlevin kullanılması gerekecektir. PHP'de, json_decode() işlevi, verileri bir nesneye (varsayılan) veya bir diziye (ikinci parametreyi true olarak ayarlayın) dönüştürmek için kullanılabilir. Hata anahtarının kontrol edilmesi bir hata olup olmadığı hakkında bilgi verdiği için çok önemlidir. Başlık kodunu da kontrol edebilirsiniz.

{
    "error": 1,
    "message": "An error ocurred"
}

Account

Get Account

GET https://link.milenyums.com/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}

Update Account

PUT https://link.milenyums.com/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

cURL PHP

curl --location --request PUT 'https://link.milenyums.com/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "email": "[email protected]",
    "password": "newpassword"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "Account has been successfully updated."
}

Markalı Alan Adları

List all branded domains

GET https://link.milenyums.com/api/domains?limit=2&page=1

To get your branded domains codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parametre	Açıklama
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}

Create a Branded Domain

POST https://link.milenyums.com/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

Parametre	Açıklama
domain	(required) Branded domain including http or https
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP

curl --location --request POST 'https://link.milenyums.com/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "id": 1
}

Update a Domain

PUT https://link.milenyums.com/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parametre	Açıklama
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP

curl --location --request PUT 'https://link.milenyums.com/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "Domain has been updated successfully."
}

Delete Domain

DELETE https://link.milenyums.com/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://link.milenyums.com/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Özel Splash

List all custom splash

GET https://link.milenyums.com/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

Parametre	Açıklama
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

CTA Overlays

List all cta overlays

GET https://link.milenyums.com/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

Parametre	Açıklama
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Bağlantılar

List all Links

GET https://link.milenyums.com/api/urls?limit=2&page=1&order=date

To get your links via the API, you can use this endpoint. You can also filter data (See table for more info).

Parametre	Açıklama
limit	(optional) Per page data result
page	(optional) Current page request
order	(optional) Sort data between date or click

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/urls?limit=2&page=1&order=date",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "urls": [
            {
                "id": 2,
                "alias": "google",
                "shorturl": "https:\/\/link.milenyums.com\/google",
                "longurl": "https:\/\/google.com",
                "clicks": 0,
                "title": "Google",
                "description": "",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "alias": "googlecanada",
                "shorturl": "https:\/\/link.milenyums.com\/googlecanada",
                "longurl": "https:\/\/google.ca",
                "clicks": 0,
                "title": "Google Canada",
                "description": "",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a single link

GET https://link.milenyums.com/api/url/:id

To get details for a single link via the API, you can use this endpoint.

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/url/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "details": {
        "id": 1,
        "shorturl": "https:\/\/link.milenyums.com\/googlecanada",
        "longurl": "https:\/\/google.com",
        "title": "Google",
        "description": "",
        "location": {
            "canada": "https:\/\/google.ca",
            "united states": "https:\/\/google.us"
        },
        "device": {
            "iphone": "https:\/\/google.com",
            "android": "https:\/\/google.com"
        },
        "expiry": null,
        "date": "2020-11-10 18:01:43"
    },
    "data": {
        "clicks": 0,
        "uniqueClicks": 0,
        "topCountries": 0,
        "topReferrers": 0,
        "topBrowsers": 0,
        "topOs": 0,
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "google": 0
        }
    }
}

Shorten a Link

POST https://link.milenyums.com/api/url/add

To shorten a link, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parametre	Açıklama
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description

cURL PHP

curl --location --request POST 'https://link.milenyums.com/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "id": 3,
    "shorturl": "https:\/\/link.milenyums.com\/google"
}

Update a Link

PUT https://link.milenyums.com/api/url/:id/update

To update a link, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parametre	Açıklama
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash]
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data

cURL PHP

curl --location --request PUT 'https://link.milenyums.com/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/url/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "id": 3,
    "short": "https:\/\/link.milenyums.com\/google"
}

Delete a Link

DELETE https://link.milenyums.com/api/url/:id/delete

To delete a link, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://link.milenyums.com/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/url/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "Link has been deleted successfully"
}

piksel

List all pixels

GET https://link.milenyums.com/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parametre	Açıklama
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Create a Pixel

POST https://link.milenyums.com/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

Parametre	Açıklama
type	(required) gtmpixel \| gapixel \| fbpixel \| adwordspixel \| linkedinpixel \| twitterpixel \| adrollpixel \| quorapixel \| pinterest \| bing \| snapchat \| reddit
name	(required) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP

curl --location --request POST 'https://link.milenyums.com/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "id": 1
}

Update a Pixel

PUT https://link.milenyums.com/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parametre	Açıklama
name	(optional) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP

curl --location --request PUT 'https://link.milenyums.com/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "Pixel has been updated successfully."
}

Delete Pixel

DELETE https://link.milenyums.com/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://link.milenyums.com/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

QR Kodları

List all QR codes

GET https://link.milenyums.com/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parametre	Açıklama
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/link.milenyums.com\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/link.milenyums.com\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a single QR Code

GET https://link.milenyums.com/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/link.milenyums.com\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}

Create a QR Code

POST https://link.milenyums.com/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parametre	Açıklama
type	(required) text \| vcard \| link \| email \| phone \| sms \| wifi
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP

curl --location --request POST 'https://link.milenyums.com/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "id": 3,
    "link": "https:\/\/link.milenyums.com\/qr\/a58f79"
}

Update a QR Code

PUT https://link.milenyums.com/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parametre	Açıklama
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP

curl --location --request PUT 'https://link.milenyums.com/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "QR has been updated successfully."
}

Delete a QR Code

DELETE https://link.milenyums.com/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

cURL PHP

curl --location --request DELETE 'https://link.milenyums.com/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Planlar

This endpoint is only accessible by users with admin privileges.

List all plans

GET https://link.milenyums.com/api/plans

Get a list of all plans on the platform.

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/plans' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/plans",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "data": [
        {
            "id": 2,
            "name": "Business",
            "free": false,
            "prices": {
                "monthly": 9.99,
                "yearly": 99.99,
                "lifetime": 999.99
            },
            "limits": {
                "links": 100,
                "clicks": 100000,
                "retention": 60,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "1",
                    "count": "5"
                },
                "overlay": {
                    "enabled": "1",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "1",
                    "count": "10"
                },
                "domain": {
                    "enabled": "1",
                    "count": "1"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "1"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        },
        {
            "id": 1,
            "name": "Starter",
            "free": true,
            "prices": null,
            "limits": {
                "links": 10,
                "clicks": 1000,
                "retention": 7,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "0",
                    "count": "0"
                },
                "overlay": {
                    "enabled": "0",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "0",
                    "count": "10"
                },
                "domain": {
                    "enabled": "0",
                    "count": "0"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "0"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        }
    ]
}

PUT https://link.milenyums.com/api/plan/:planid/user/:userid

To subscribe a user to plan, send a PUT request to this endpoint with the plan id and user id. The type of subscription and the expiration date will need to be specified. If the expiration date is not specified, the date will be adjusted according to the type.

Parametre	Açıklama
type	monthly \| yearly \| lifetime
expiration	(optional) Expiration date of the plan e.g. 2024-12-21 09:24:21

cURL PHP

curl --location --request PUT 'https://link.milenyums.com/api/plan/:planid/user/:userid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "monthly",
    "expiration": "2024-12-21 09:24:21"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/plan/:planid/user/:userid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "type": "monthly",
    "expiration": "2024-12-21 09:24:21"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "User has been subscribed to this plan."
}

Kullanıcılar

This endpoint is only accessible by users with admin privileges.

List all users

GET https://link.milenyums.com/api/users?filter=free

Get a list of all users on the platform. Data can be filtered by sending a filter parameter in the url.

Parametre	Açıklama
filter	admin \| free \| pro
email	Search a user by email

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/users?filter=free' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/users?filter=free",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "data": [
        {
            "id": 2,
            "email": "[email protected]",
            "username": "sample2user",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
            "status": "free",
            "planid": 1,
            "expires": null,
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        },
        {
            "id": 1,
            "email": "[email protected]",
            "username": "sampleuser",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar.png",
            "status": "pro",
            "planid": 2,
            "expires": "2022-11-15 15:00:00",
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        }
    ]
}

List a single user

GET https://link.milenyums.com/api/user/:id

Get data for a single user.

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/user/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/user/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "data": {
        "id": 2,
        "email": "[email protected]",
        "username": "sample2user",
        "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
        "status": "free",
        "planid": 1,
        "expires": null,
        "registered": "2020-11-10 18:01:43",
        "apikey": "ABC123DEF456"
    }
}

Create a user

POST https://link.milenyums.com/api/user/add

To create a user, use this endpoint and send the following information as JSON.

Parametre	Açıklama
username	(required) User's username. Needs to be valid.
email	(required) User's email. Needs to be valid.
password	(required) User's password. Minimum 5 characters.
planid	(optional) Premium plan. This can be found in the admin panel.
expiration	(optional) Membership expiration example 2020-12-26 12:00:00

cURL PHP

curl --location --request POST 'https://link.milenyums.com/api/user/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "username": "user",
    "password": "1234567891011",
    "email": "[email protected]",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/user/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => '{
    "username": "user",
    "password": "1234567891011",
    "email": "[email protected]",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "User has been registered.",
    "data": {
        "id": 3,
        "email": "[email protected]",
        "username": "user"
    }
}

Delete a user

DELETE https://link.milenyums.com/api/user/:id/delete

To delete a user, use this endpoint.

cURL PHP

curl --location --request DELETE 'https://link.milenyums.com/api/user/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/user/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "message": "User has been deleted."
}

GET https://link.milenyums.com/api/user/login/:id

This endpoint will generate a unique link that will allow the user to automatically login to the platform. SSO login urls are valid for 1 hour and they can be used a single time.

cURL PHP

curl --location --request GET 'https://link.milenyums.com/api/user/login/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://link.milenyums.com/api/user/login/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

Sunucu cevabı

{
    "error": 0,
    "url": "https:\/\/link.milenyums.com\/user\/login\/sso\/nbfueswtjfmgiatdxcfmtjhfuzwujmll"
}

Kaynaklar

Çözümler

Account

Markalı Alan Adları

Özel Splash

CTA Overlays

Bağlantılar

piksel

QR Kodları

Geliştiriciler için API Referansı v3

Başlarken

kimlik doğrulama

Oran Sınırı

Yanıt İşleme

Account

Get Account

Sunucu cevabı

Update Account

Sunucu cevabı

Markalı Alan Adları

List all branded domains

Sunucu cevabı

Create a Branded Domain

Sunucu cevabı

Update a Domain

Sunucu cevabı

Delete Domain

Sunucu cevabı

Özel Splash

List all custom splash

Sunucu cevabı

CTA Overlays

List all cta overlays

Sunucu cevabı

Bağlantılar

List all Links

Sunucu cevabı

Get a single link

Sunucu cevabı

Shorten a Link

Sunucu cevabı

Update a Link

Sunucu cevabı

Delete a Link

Sunucu cevabı

piksel

List all pixels

Sunucu cevabı

Create a Pixel

Sunucu cevabı

Update a Pixel

Sunucu cevabı

Delete Pixel

Sunucu cevabı

QR Kodları

List all QR codes

Sunucu cevabı

Get a single QR Code

Sunucu cevabı

Create a QR Code

Sunucu cevabı

Update a QR Code

Sunucu cevabı

Delete a QR Code

Sunucu cevabı

Planlar

List all plans

Sunucu cevabı

Subscribe a user to a plan

Sunucu cevabı

Kullanıcılar

List all users

Sunucu cevabı

List a single user

Sunucu cevabı

Create a user

Sunucu cevabı

Delete a user

Sunucu cevabı

Login a user